2000 kVA Amorphous Core Distribution Transformer


  • Standards: IEC 60076
  • Rated Power: 2000kVA
  • Rated Frequency: 50 Hz
  • Rated High Voltage: 11 kV
  • HV Tapping Range: +71/2, -5%
  • Tap Switch: Off circuit
  • Rated Low Voltage: 415 V
  • Tap Steps: 5 x 21/2 %
  • Cooling Method: ONAN
  • Thermal Class: A (105°)
  • Coolant: Mineral Oil
  • Insulation Level : Li75.Ac28 / Ac3
  • Vector Group: Dyn11
  • Core Material: Amorphous
  • Winding Material: Aluminium
  • Temperature Rise, Oil/Wdg: 60 / 65°C
  • Load Loss @ 75°C: 12,930 w
  • No Load Loss: 660 W
  • Impedance: 6%


Quote Now
HV Cable Box
3 pole single gland air filled, shroud insulated, suitable
for a single multi core cable from below complete with a mild
steel gland plate. Compliant with BS EN 50336 and BS 2562.
(Excludes necessary glands, lugs and termination kit).
LV Cable Box
4 pole 4 gland air insulated, suitable for single core cables
from below, complete with mono block bushing, non-magnetic
gland plate. Compliant with BS EN 50336 and BS 2562.
(Excludes necessary cables, glands and lugs).
Paint Finish
Painted with a dark grey finish to BS381c – 632 incorporating corrosion
category C4 of ISO 12944.
Neutral Point
A fully rated neutral point provided as standard.

Contact Daelim Transformer for special requirements

ENA TS 35-1 terminal height
Oil filler top plate
Oil level indicator
Main lifters
Breather Pipe
Thermometer pocket
Rating and diagram plate with CE and UKCA marks
Oil drain / sampling valve
Stainless steel earth lugs
Jacking points
Skid under base
1 x Desiccant breather
2 x Tins touch up paint (1x Grey, 1x Yellow)
1 x Paint Brush
1 x Transformer routine test certificate
1 x Certificate of Conformity
1 x O&M manual
DOE
AS
GOST

Quote Now


Please Write your message, ask for price, we will reply you soon, thanks

ABOUT US

We are a professional transformer manufacturer and electric equipment supplier, who has been working in electric industry for more than 20 years. Our advantage is that we can produce transformer based on multiple standards, such as ANSI/IEEE, CSA, IEC, AS/NZ and etc. You will get the quickest response and superior service being working with us.

PRODUCT CATEGORY
CONTACT US