15 kVA Single Phase Pad Mounted Transformer
- Primary Voltage Ratings: 34.5-19.92/13.8-7.957/13.2-7.62/12.47-7.2 ，27.6/16 or others
- Secondary Voltage Ratings: 120-240/240-480/347/600 or others
- H.V. TAP RANGE: ±2×2.5% or others
- CONNECTION TYPE: Delta/Wye
- TYPE: Dead front/Live front
- BIL: 30-150
- Standards: IEEE, CSA, DOE, UL
- Application: Industry, Utility, Constuction
- Power Rating: 15 kVA
Daelim 15 kVA pad-mounted transformer meets/exceeds DOE 2016 efficiency ratings with UL/cUL listed. Design and production with ANSI/IEEE, CSA standards.
Quote Now
Down Loads
Daelim Single Phase Pad Mounted Transformer Catalog
Daelim Single Phase Pad Mounted Transformer Operation And Maintenance Manual
Learn more about Single Phase Pad Mounted Transformer
Specifications
| Model: ZGDL-H-15 12.47Y/7.2-24.94Y14.4-240/120 | HV BIL: 125 kV |
| Standard manufacturing and testing: C.57.12.00; C.57.12.28; C57.12.90 | LV Insulation class: 1.2 kV |
| Type： Loop feed pad mount | LV BIL: 30 kV |
| Installation： Outdoor | Audible sound level: 48db |
| Altitude above sea level/Ambient temperature:1000m/20℃ | |
| Altitude≤1000m | |
| Rated Power:15 kVA | Impedance: 2% |
| HV: 12470Y/7200V,24940Y14400 | Impedance tolerance: ±10% |
| LV: 240/120 | Tank: Mild steel |
| Rated Frequency: 60Hz | Colors: Munsell Green |
| Cooling System: ONAN | Height:: 700mm |
| Core material: Silicon Steel Core | Depth: 1000mm |
| Refrigerant:: Mineral oil 45# (PCB FREE) | Width: 900mm |
| Working-Temperature: -45°C to +40°C | Weight |
| The temperature rise -Top oil: 65°C | Oil weight: 90kg |
| The temperature rise --Winding: 65°C | Total weight: 295kg |
| Hot spot:: 80°C | |
| No load losses at 105% rated voltage: 125W | Contact us for special requirements |
| Load loss at the rated voltage at 85°C: 441W | Tel: +86-10-65003129 |
| Winding material: Aluminum | Email: pingruidan@daelim-electric.com |
| HV Insulation class:25 kV |
|
Daelim 15 kVA single phase pad mounted transformer operates safely, reliably, and efficiently and can be installed indoors and outdoors. This type of transformer has a low operating cost, is environmentally friendly, easy to install, and has a low purchase cost, so it is widely used in residential, commercial, and other public places.
Transformer Features: The industrial transformer has a rated power of 15 kVA.The unit transformer is a dual high-voltage design. The high voltages are 12470y/7200V and 24940y/14400V.
The ZGD-H-15/12.47/7.2-24.94/14.4-240/120 transformer is an ONAN cooling method. The manufacturing and testing standard are IEEE C.57.12.00; IEEE C.57.12.28; IEEE C57.12.90
Learn more about Pad Mounted Transformer
Insulation Fluid: The ZGD-H-15/12.47/7.2-24.94/14.4-240/120 transformer uses mineral oil 45#. The boiling point and instant ignition point of mineral oil are not lower than 140°, and it is not flammable. It has good insulation and heat dissipation effect, which not only improves the insulation strength but also protects against moisture erosion. Does not produce PCB and other harmful gases. It is harmless to people. If you need vegetable oil, Daelim can provide two brands of FR3 and RAPO for you to choose from.
Tap Changer: The ZGD-H-15/12.47/7.2-24.94/14.4-240/120 transformer has a 5-position tap changer. Daelim can provide 3 position and 7-positon no-load tap changer.
Accessories including :
Core&Coil Assemble: 1
Bayonet fuse: 1
Drip shield Assembly: 1
Fuse Holder: 1
Backup fuse: 1
Fuse assembly: 1
Pressure relief valve: 1
Oil level gauge: 1
Oil-in flug: 1
Nameplate: 1
HV bushing well and insert: 2
No-load tap changer: 1
Grounding spade terminal: 2
Oil-out plug: 1
Bolt for earth: 1
Copper strip: 1
LV Terminal: 3
Tap Changer: 1
Bolt for lifting: 4
Certificate
Daelim is a professional pad mounted transformer manufacturer. Pad mounted transformer has UL/cUL, CSA, CESI, and other certificates. Can meet the requirements of various international standards, such as ANSI/IEEE, CSA, and DOE efficiency value.
DOE
AS
GOST